nickadam

I purchased my Samsung BD-P1590/XAA from woot.com back in March or April I think, and like a few other things from woot it didn’t work.  I’m usually pretty good about cashing in on the 90 day warranty, but I had an issue with samsung customer service and getting the shipping info.  Anyhow I let the warranty slip.  Being an avid do-it-yourselfer, I decided to dedicate some time to a repair attempt; here is the step by step.

1.  Remove the cover.  Start with the 5 screws on the metal cover and remove

2.  Remove the face panel.  Then pry the 8 or so plastic clips from the front cover and remove the front cover/display panel.  (Two of the plastic clips are smaller and on opposite sides on the top of the disc drive, you shouldn’t have to remove the ribbon cable)

3.  Lift the disc drive.  Remove the 4 chrome screws from the bottom of the disc drive and pry the tape off the chassis.  Lift the disc drive up and prop it up against the chassis face.  You shouldn’t have to remove the ribbon cables.  Lifting the drive out of the chassis is only so you can open the disc drive.

4.  Open the disc drive.  Remove the 4 black screws from the top cover of the disc drive and lift the cover off.  Pry the blue magnet out of the top cover so you can easily test the drive.

5.  Adjust the lasers!  Im not really sure how much insight I can provide here as to the right way to accomplish this.  I’ve done this before with my PS2 so I’m basically applying the same pricipal.  You will see 3 tiny screw heads on the right side of the disc drive board.  Fiddle with those.  For me all I had to do was turn each of them 1/2 turn counter clockwise and everything worked!  Be sure to test DVD’s, Blu-rays, and if you wish DVD-R(W) before you close everything back up.

6.  Put it all back together and pat yourself on the back.